Matt_Fisher
Army.ca Veteran
- Reaction score
- 3
- Points
- 430
IMO a major issue in regard to CF spec'd ballistic eyewear is the closed nature of the objecive performance specifications. Several companies have expressed frustration in regard to DRDC Valcartier/DSSPM being so tight lipped about what their performance objectives are, it's difficult for them (the eyewear manufacturers) to work on engineering a solution to meet the Canadian requirements as they don't really know what objective they're having to build to.
I don't have any issue with the CFs having their own standard (provided that it's superior to what is already established as ANSI/CSA/Mil ratings) for PPE performance, but what I think is fair is that industry is given a fair opportunity to participate in developing equipment that can meet the spec, is validated by DND sanctioned testing programs (whether they're run through DRDC Valcartier or outsourced to an independent facility), even if it is the commercial interest that has to foot the bill for the testing, provided that if the product meets or exceeds the objective standard it is allowed for personal procurement, i.e. US Army Approved Protective Eyewear List.
What is frustrating is that given the CFs strong concern for PPE, the glacial speed procurement for a goggle solution for operational use. On the one hand we're giving doom & gloom messages to the troops about not deviating from the issued BEW, as "SISIP/VAC won't cover you if you're not wearing them..." "No Wiley X's because I was just told you can't wear them..." yet we're still issuing 'Sun/Wind/Dust Goggles' NSN 8465-01-004-2893 which aren't designed to interface with the MNVG (Goggles are a slightly updated version of the 1940's era 'Type 1021 Polaroid Goggle' ) and have less than stellar ballistic performance (I'm quite confident in assuming that they would NOT meet the current CF spec for ballstic performance).
There are several COTS ballistic glasses and goggles that are designed to work with the AN/PVS-14. Whether they meet Canadian specs or not? I know that two of the ESS models (V-12 and Profile NVG) were tested by DRDC Valcartier in 2006/2007 and found to be acceptable enough that there was a MR 'Try & Buy' for TF 1-07 to use operationally. If you look at the cost and timeframes involved in engineering a MNVG that's BEW compatible, I think that is NOT the solution, unless we're looking at incorporating all our optical (both image intensification and PPE) as well the communication headset/microphone into some sort of integrated helmet.
I don't have any issue with the CFs having their own standard (provided that it's superior to what is already established as ANSI/CSA/Mil ratings) for PPE performance, but what I think is fair is that industry is given a fair opportunity to participate in developing equipment that can meet the spec, is validated by DND sanctioned testing programs (whether they're run through DRDC Valcartier or outsourced to an independent facility), even if it is the commercial interest that has to foot the bill for the testing, provided that if the product meets or exceeds the objective standard it is allowed for personal procurement, i.e. US Army Approved Protective Eyewear List.
What is frustrating is that given the CFs strong concern for PPE, the glacial speed procurement for a goggle solution for operational use. On the one hand we're giving doom & gloom messages to the troops about not deviating from the issued BEW, as "SISIP/VAC won't cover you if you're not wearing them..." "No Wiley X's because I was just told you can't wear them..." yet we're still issuing 'Sun/Wind/Dust Goggles' NSN 8465-01-004-2893 which aren't designed to interface with the MNVG (Goggles are a slightly updated version of the 1940's era 'Type 1021 Polaroid Goggle' ) and have less than stellar ballistic performance (I'm quite confident in assuming that they would NOT meet the current CF spec for ballstic performance).
MCG said:There is, however, a problem in that ballistic eye wear (in its various issued types) does not cooperate well with the MNVG. If by this point in time we (the CF) have not found effective BEW that is MNVG compatible, then perhapses it is time to get an effective MNVG that is BEW compatible.
There are several COTS ballistic glasses and goggles that are designed to work with the AN/PVS-14. Whether they meet Canadian specs or not? I know that two of the ESS models (V-12 and Profile NVG) were tested by DRDC Valcartier in 2006/2007 and found to be acceptable enough that there was a MR 'Try & Buy' for TF 1-07 to use operationally. If you look at the cost and timeframes involved in engineering a MNVG that's BEW compatible, I think that is NOT the solution, unless we're looking at incorporating all our optical (both image intensification and PPE) as well the communication headset/microphone into some sort of integrated helmet.