• Thanks for stopping by. Logging in to a registered account will remove all generic ads. Please reach out with any questions or concerns.

The brown Temperate Combat Boot (AKA: Mk IV Cbt Boot) - No longer CADPAT

  • Thread starter Thread starter petoth
  • Start date Start date
Infanteer said:
To be more specific about language, it's a CANLANDGEN/CANARMYGEN and, if I recall correctly, it prohibits the use by COs of O&M funds (L101) for the purchase of operational clothing and equipment.  The reason is two-fold - first the CFSM has policies in place to expend the right type of funds to provide footwear and secondly it prevents units from doing what DLR is supposed to do.

I believe the CANLANDGEN simply re-inforced the earlier published CANFORGEN (most offenders seemed to be Army COs [Commandants at Schools  ;)] at the time, offending after the CANFORGEN had already been published).  I'll dig for all the refs tomorrow and paste 'em up.

And, seriously, is the winter footwear now an issue as well?
 
Sorry for my tardy post ~~~ work happens.

I just had an update from Clothing Stores BTW on shortages ... mukluks were not mentioned as being defecient/limited stocks.

CFSM (Cdn Forces Supply Manual)  Ref:  CFSM Vol 3, Ch 13, Sect G

http://admmat.mil.ca/dgmssc/dmpp/documents/ARCHIVED%20CFSM%20Oct%202013.pdf

3-13G-002. Special size personal allotment clothing, footwear and orthopaedic furniture

4. Special size clothing:

a.  Except for those non-stocked items, which are normally issued as made-to-measure, every effort shall be made to equip personnel from standard or peripheral stock sizes. This includes carrying out minor alterations and adjustments to obtain a reasonable fit. Because of the tolerances allowed in the production of garments, attempts should be made to fit personnel before resorting to Special Clothing Size Roll procedures.

b. Personnel who cannot be equipped with standard or peripheral size garments are entitled to the issue of special size items for actual requirements, not exceeding the quantity authorized by the applicable EGC.

c. When uniforms or other articles of clothing require special procurement. For example, a size not stocked at any level, B/W/S SupO shall confirm all requests prior to initiating procurement action. Prices are obtained from local manufacturers and procurement action is taken IAW DAOD 3004. Bases, stations, and wings fund special size requirements from Command allotments. If an individual is undergoing training at a unit other than his home unit, funding for special size clothing, footwear, and equipment should be requested from the individual’s home unit.

d. Under no circumstances shall personnel be permitted to provide fabric for manufacture of special size clothing. The base/wing/station requisition fabric in the normal manner if available from the system, if not available, base/wing/station will contact the C3 contract coordinator at DSSPM who will attempt to find fabric through the C3 contract or other source. Uniform specifications must also be obtained from Director Soldier Systems Program Management (DSSPM C3 contract coordinator) for guidance to manufacturers. The supply of fabric and specifications to the manufacturer from the system ensures a high standard of uniformity in dress. Normally, special size clothing shall not be ordered for individuals during their last six months of service.

e. To obtain special size clothing, form DND 2160 (21-883-2991), Special Clothing Size Roll (men) or form DND 2159 (21-870-7580), Special Clothing Size Roll (women), as applicable, shall be prepared in 3 copies with distribution as follows:

i. Two copies to manufacturer
ii. One copy to be filed in individuals CF 892

Note: Manufacturers may elect to use their own sizing forms. In this case, sufficient copies are obtained to meet distribution requirements.

f. Where there is a major discrepancy between the garment and the size roll, the following standardized procedure is implemented:

i. The unit tailor or qualified service personnel measure the individual, check the size roll for correctness, chalk mark the garment where incorrect and detail the alterations required for a proper fit.
ii. The contractor verifies the discrepancies between the garment and size roll and if it cannot be satisfactorily altered, the contractor is requested to manufacture a new garment.

iii. Invoices are held pending receipt of a satisfactory garment.

g. Where garments are received and rejected for reasons other than a contractor’s deficiency, disposal action is to be initiated. A new order shall be initiated to satisfy the individual.

h. When a contractor is not available in the vicinity of the base/station/wing, orders are placed directly to the nearest available manufacturer. B/W/S SupO shall ensure that only unit civilian tailors or qualified service personnel measure individuals for special size clothing using the guidelines detailed. These measurements must be typed or legibly written on the Special Size Roll. Districts carry out minor alterations upon receipt to ensure a satisfactory fit. However, where there is an obvious discrepancy between the garment and the size roll, items are returned collect to the manufacturer accompanied by a letter detailing the reason for return.

i. When special size clothing is ordered for an individual MSO014 Supply Customer Maintenance shall be used to annotate the member’s IA (special instructions) with the special size requirements. Item(s) should be brought on charge using special size NSN for that particular garment.

j. Except in the case of an occupational transfer, special size roll public clothing issued to an individual shall not be withdrawn when the employment justifying its issue ceases; the individual retains that clothing, if serviceable, during his period of service.

5. Special size footwear:

a. The following definitions are provided for the purpose of this article:

i. Orthoses: Is an orthopaedic appliance or apparatus used to support, align, prevent or correct deformities or to improve function of moveable parts of the body. One common example is a custom foot insole.
ii. Orthopaedic Footwear: Is custom footwear required by individuals with deformed or surgically treated feet. This includes custom-made military pattern footwear, and internal or external modifications to military and civilian footwear. Orthopaedic footwear is funded by the Command Surgeon.

b. If after being fitted IAW Measuring and fitting of footwear (CFSM 3-13G-003) an individual is found to have a foot size, which does not fall within the range of standard catalogue footwear sizes and does not require orthopaedic footwear, the individual will be provided with special size footwear regulated by DSSPM. B/W/S is responsible to fund these requirements through their Command allotments. All special size boots are free issue to all Regular and Reserve force members. Supply sections shall ensure the member receives footwear that fits properly and that meets performance and quality standards equivalent to the authorized CF footwear to which the member is entitled as defined in the applicable scales of issue. Special size safety footwear must meet the safety standards of the regulation footwear. Supply sections are under no obligation to procure brand name footwear. Wherever possible, the special size footwear should be the same color and materials as CF issued footwear. The procedures for Special size shoes/oxfords is covered at para 7.

c. Athletic Shoes will only be issued to recruits on a one time basis and will not be exchangeable or available for purchase. CF members Regular and Reserve force are responsible for the purchase of athletic shoes upon completion of recruit training. The only exception would be for a member who has suffered a CF related injury or has surgically treated feet and requires a custom build athletic shoe. In these rare cases the athletic shoe would be purchased by supply and funded by the Command Surgeon.
Note: Class “A” Reservists shall only be issued one pair of Special Size Boots or Oxfords/Shoes as applicable. For example if an individual is entitled to one pair of shoes and two pair of boots the individual shall be issued one pair of shoes and one pair of boots. If the individual is converted to “B” or “C” class they shall be issued their full entitlement.
d. When special size footwear is ordered for an individual Supply Customer Maintenance MSO014 shall be used to annotate the member’s IA (special instructions) with the special size requirements. Item(s) should be brought on charge using the special size stock code for that particular footwear. If none is available, the stock code of the closest size will be used, taking caution to ensure that the total quantity (comprised of current balance, dues-in and special size items) does not exceed the district ROP/ROQ, which in turn could result in redistribution. Each time the individual requires footwear; the IA shall be checked to ascertain when the item was previously issued. Normally, special size footwear shall not be ordered for individuals during their last six months of service.
e. Special size footwear issued to an individual shall not be withdrawn when the employment justifying its issue ceases. The individual retains the footwear during his entire period of service.

6. Orthopaedic and modified footwear:

a. When recommended by a medical board or specialist, individuals with deformed or surgically treated feet shall be provided with specially made or modified footwear in lieu of regulation boots and shoes.
b. Orthopaedic footwear shall be obtained through a Federal, Provincial or local orthopaedic and prosthetic facility IAW CF H Svcs Gp Inst 4090-20. Footwear requiring modification shall be altered as required by the same orthopaedic facility or by local procurement when authorized by the base medical officer, at no expense to the individual.

c. Special Size Orthopaedic boots and modification to boots are always at no cost to the member. Special Size Orthopaedic Boots shall be brought on charge by CRV and entered on the individual’s IA. Only the initial issue of Orthopaedic shoes/oxfords are free issue, procedures are detailed in para 7 of this article.
d. Normally orthopaedic footwear shall not be ordered for individuals during their last six months of service.

e. Orthopaedic footwear obtained as per CF H Svcs Gp Inst 4090-20 is paid for by the appropriate Command Surgeon.

7. Special Size Shoes/Oxfords:

a. Special size shoes/oxfords are free issue upon enrolment. Following enrolment special size shoe requirements must be purchased using applicable points for shoes/oxfords. If points are not available, member is required to purchase the shoes as per the price indicated using MSO101, option 1, action code “9.” There are only two exceptions, which allow the free issue of shoes/oxfords following an individual’s enrolment:

i. The initial issue of shoes/oxfords as a result of a change in medical condition which requires shoes to accommodate orthoses such as arch supports, special insoles etc. The member must present the prescription or medical chit to Clothing Stores to be entitled to the initial free issue. The initial issue is funded by the supporting supply section through Command allotments. All subsequent requirements must be paid for using the applicable points for shoes/oxfords or funded by the member as per the price indicated using MSO101, option 1, action code “9” Clothing Stores must forward details of special size shoe purchases including members name, SN, item purchased to DSSPM email who will have the applicable number of points removed from the members account.
ii. The initial issue of Orthopaedic or modified shoes/oxfords are free issue, and funded by the Command Surgeon. Any subsequent issues must be paid for using the applicable number of points for shoes/oxfords or funded by the member with the price indicated using MSO101 option “9." Orthopaedic footwear is defined at Para 5a. Clothing Stores must forward details of purchase to DSSPM so points can be removed, same procedure as for special size shoes. A copy of the medical officer’s recommendation is to be filed in the individual’s CF 892, and Supply Customer Maintenance MSO014 shall be used to annotate the member’s IA (special instructions) with the appropriate information.

8. Resoling of MKIII Combat boots NSN 8430-21-872-4291

a. Resoling is limited to the MKIII combat boot only, Medical Specialist Officers and GDMO are the only authority that can prescribe replacement of the insole and outsole components. Funding for the replacement of components is the responsibility of the supporting supply section through their command allotments as per the special funding requirements.
b. In the event that resoling of the MKIII is prescribed alteration specifications should be coordinated between the Medical Officer and the physiotherapist. NDHQ/DSSPM 2-3 is available to provide technical assistance, as required.

c. In the event that resoling is prescribed to alleviate a medical condition diagnosed IAW policies established in CF H Svcs Gp Inst 4090-20, the following specifications should be followed:

i. Materiel - Vibram “Sierra” (Model #1276) or Vibram “Kletterlift” (Model #148) outsole with a cushion midsole of polyurethane.
ii. Thickness - The thickness of the polyurethane should be sufficient to maintain the original heel elevation of the boot. It should generally run from approximately 1 inch thick at the heel to a third of an inch - to half an inch at the ball and toe.

………. (Deleted: Orthapedic Furniture)

3-13G-003. Measuring and fitting of footwear

11. This book details the responsibility of supply officers and the procedures to be followed at B/W/S to ensure that all personnel are issued with correctly measured and fitted footwear and clothing.
12. It is the responsibility of the B/W/S SupO to ensure that the correct size footwear is issued to all personnel. Improperly fitted footwear affects the general well being of an individual, often to such an extent as to impair health, morale and efficiency. It is, therefore, of the utmost importance that individuals wear footwear for which they have been measured and properly fitted.

13. Each individual shall be measured using Scholls, Ritz or Korrecto foot-measuring devices. The instructions for use are found on the reverse side of the device. Both feet must be measured, and the longer foot shall take precedence in determining size.

14. When measured IAW the above paragraph, the individual shape of the foot, which affects comfort, is not taken into account, therefore, a test for overall fit of the selected size of footwear is necessary.

15. After a size has been determined by means of the foot-measuring device, a fitting test shall be made on both feet, ensuring that, when fitting boots, combat, GS Mk 111 (modified), the saran mesh insoles are the correct size and in place with the nylon layer next to the foot. It shall be ensured that individuals:

a. are wearing the type of hose which complies with regulations for the type of footwear being fitted
b. are standing erect for combat boots

c. have their weight evenly distributed on both feet

d. have their heels well back in the footwear, with the footwear fully laced up

e. who normally wear arch supports or other orthopaedic aids are wearing these appliances at the time of fitting

16. The following four tests are performed when checking the fit of all types of military boots and shoes:

a. Test 1 - Snug fit under the arch is determined by grasping both shoes over the instep with the thumbs on the outside and the fingers pressing firmly against the under arch, close to the outer soles on the inner side of the shoes. The leather should lie snugly against the under arch and should be free from excessive wrinkles and fullness.

b. Test 2 - Proper position of the ball joint is determined by locating the ball joint with the thumb of each hand. The ball joint should lie approximately in the widest portion of the shoe, just ahead of the area where the sole curves into the shank under the arch.

c. Test 3 - placing a thumb low on either side of the vamp, at the widest part of the shoe, and gradually working each thumb slowly upwards towards the centre until the thumbs nearly meet determine proper width across the ball of the shoe. The foot without apparent tightness or excessive fullness should fill the shoe. Each shoe must be checked separately for width.

d. Test 4 - Proper length is determined by pressing each shoe at the toe with both thumbs. The proper length of footwear manufactured with hard box toes shall be determined by the position of the ball of the foot in relation to the ball of the shoe and the foot under the arch. Toe room in boots or shoes not having hard box toes may be determined by having the person being fitted move his toes while the fitter feels the upper area of the shoe or boot to determine the amount of free space. There should be a clearance or space of approximately one-half inch between the end of the longest toe and the end of the shoe. Each shoe must be tested separately for length.

17. If fitting indicates that an individual’s foot size is not within the range of standard catalogue footwear sizes, the individual is provided with locally purchased special size footwear IAW Special size footwear.
 
Back
Top